DIY Bird Box for Robins, Wrens, Pied Wagtails, Eastern Bluebirds, Northern Flickers and Purple Martins.

Spring is the time when birds begin to look for good nesting sites. They may try many possibilities and even actually start the makings of a nest before they actually make their final choice. You can help them and attract many of these birds to your garden by providing them with a good choice of homes. In the last blog we looked at one design to attract a specific group. Now I'm going to proffer this design to attract some others. Over the decades the natural nesting sites, cracks in old buildings and garden walls and shakes in ancient trees, have become rarer. Our aim is also to create something which would blend into the background to attract these often shy birds.

As a rule, in Europe these boxes are expected to attract mainly robins, wrens and wagtails. In the USA there are over 50 species who prefer to use an open-fronted cavity nest. However, wherever you live you should research the individual habits and volumes needed for any specific  bird. Martins, for example, prefer to nest in colonies so you should provide either 5 or 6 boxes placed closely together or one large box with separate nesting chambers. Blackbirds may also use this type of box but would need it to be enlarged by around 50%.

The materials and construction are the same as for our previous box but I will repeat them here in case you have not read the post. If you have, then please continue down the page until you come to the section on the positioning of the front planks.

Materials

The box is based on the same design as my Apple House but is formed around a larger 140 mm - 5½" pallet block. You will need 1 or 2, 100 mm - 4" wide pallet wood planks and the wood strips from a fruit crate or orange box. We decorated it with water-based acrylic varnish and tinted it with earth and mineral pigments. For information on mixing these: http://thegreenlever.blogspot.fr/2012/02/using-natural-earth-and-mineral.html

Construction

 

For the four sides, mark out the first length, which corresponds to the length of the block plus plank thickness. Cut four sides to this length.


 

Pre-nail the planks, if the wood splits at this juncture, then drill a pilot hole at a slightly smaller diameter than the nail shank and then nail. 














Position and nail front.

 

 

Cut base to make a platform suitable for nest building, 100 mm x 100 mm - 4" x 4" and mitred at 45°. 

 
 
Mark the position of the shelf from the inside.

 

Drill pilot hole and screw the shelf in position.

 


Trim the edges. 

You now have something which looks like this.

 

 

Select wood for back of box and trace round the box as a guide for drilling pilot holes for nailing the back and screwing in the shelf.

 

  

 

Nail back wall and screw shelf into place.

Trim

Drill pilot holes for wall mounting box at bottom...

...and top.

 

Drill a drainage hole. This is very important with an open-fronted design.

 

Cut fruit crate wood to length to make shingles. Due to the open aspect, these should project well over the front of the box to protect it from rain, sun and to give more privacy.

 

 
To finish, we use earth and mineral paints and acrylic water-based varnish... 

...with a design which mimicked the golden hearted ivy growing on the wall where we were going to site it. 

We made another to fit snugly under the eaves of the pallet wood hen house.

Now, if you'd like to, sit back and enjoy he film.

The previous post has another nesting box - a design for blue tits, chickadees and pied fly catchers

Thanks for dropping by and please feel free to share this article, comment, ask questions and if you'd like to be assured of getting the next post, then sign up to follow this blog.

All the best, Andy

© Andy Colley 2014

RETURN TO GREEN LEVER CONTENTS PAGE FOR MORE ARTICLES 

DIY Nesting Box for Blue Tits, Chickadees, Pied Fly Catchers, Sparrows and Nuthatches.

It's Spring and the birds are still out looking for nest sites, which over the past decades have dwindled. You can help them and attract them to your garden by providing them with a suitable desirable residence. The example below is a simple design, requiring a minimum of tools and in particular to obviate the need for a hole saw or large bit.

Natural nesting sites do not come with standard size front doors but for the above 'hole-in-the-front' design, there is a general rule of thumb, with some examples, given below. It is interesting that of the two bird boxes we gave as presents last year, one had an exact  25 mm round hole and the blue tits spent a couple of days enlarging the opening before they used it. Whilst the other box, at a location, some 10 miles away from the former was of the above design and was used without problem. However, making the box of pine means it is easy to modify with a beak and why shouldn't birds, like most of us, enjoy personalising their own home.

This one has a round entrance but is harder to make than the above design as it requires a large boring bit. Both the designs were recently given as Birthday presents and I'm happy to say all have tenants!

25 mm - 1" for blue, coal and marsh tits and chickadees.

28 mm - 1 1/8" for great tits, tree sparrows and pied flycatchers 

32 mm - 1¼" house sparrows, tree swallows and nuthatches

45 mm - 1¾" starlings

150 mm x 150 mm - 6" x 6" for the barn owl box I am in the process of making

Materials

The box is based on the same design as my Apple House but is formed around a larger 140 mm - 5½" pallet block. You will need 1 or 2, 100 mm - 4" wide pallet wood planks and the wood strips from a fruit crate or orange box. We decorated it with water-based acrylic varnish and tinted it with earth and mineral pigments. For information on mixing these: http://thegreenlever.blogspot.fr/2012/02/using-natural-earth-and-mineral.html   

Construction

 

For the four sides, mark out the first length, which corresponds to the length of the block plus plank thickness. Cut four sides to this length.


 

Pre-nail the planks, if the wood splits at this juncture, then drill a pilot hole at a slightly smaller diameter than the nail shank and then nail. 

 

 
Cut base to make a platform suitable for nest building, 100 mm x 100 mm - 4" x 4" and mitred at 45°. 

Position and nail front.

 


Put each plank in place and from the back draw the outline of the frame and use that as a guide for the pilot holes to avoid splitting the wood.

 

 
Trim the edges. 

 

With the shelf in place, mark its position from the inside. This will enable the correct location for the retaining screw. Drill and screw in place.



 
 

Select planks for the rear of the box. It is a good idea to screw these into place in case you need to clean out the box after use. 

The centre piece is put on first so that the correct position for the screw holding the shelf from the back can be easily located.

 

Mark out the outline of the box onto the remaining planks.

Drill screw holes.



 

Screw to the back. Trim the top with a generous border. This allows for mounting holes for screws and nails.

Cut lengths of fruitcrate wood to make shingles for the roof. Attach to roof with staples or panel pins. 

 
You can finish with a coat of linseed/hemp oil or acrylic water-based varnish.

To create an illusion of the box being a natural nesting site, we decorated ours with the same climbing ivy as was growing in the place we intended positioning our box.





Now if you'd like to, sit back and watch the film. 

Next post will be a design for an open-fronted box, suitable for Robins, Wrens, Eastern Bluebirds, Northern Flickers, and Purple Martins.

Thanks for dropping by and please feel free to share this article, comment, ask questions and if you'd like to be assured of getting the next post, then sign up to follow this blog.

All the best, Andy

© Andy Colley 2014

RETURN TO GREEN LEVER CONTENTS PAGE FOR MORE ARTICLES 

 

Home-made Wild Bird Feeder from Repurposed Materials - A is for Apple House

Our handsome Polish crested cockerel Ruffles showing far too much interest in this easy to make pallet wood food dispenser, for use with fruit or fat balls.

This is something to make for your own garden but also we have made and given away many as presents. They make ideal gifts to take round to a house warming or Birthday party. We also have on this blog the 'how-tos' for various design bird boxes and an insect hotel all of which have film follow-ups. Many of our projects take less than an hour to assemble, even including the preparation. They also use a minimum of tools and purchased extras and they have scope for personalised, individual decoration and imagination. If you are really inventive you could even recuperate all your nails and tacks and take the price of your presents down to zero. The wood used in all the projects is untreated pallet wood so if you follow these links you will be able to pick up two articles with information on finding and using pallets:
http://thegreenlever.blogspot.com/2011/11/how-to-collect-pallets.html
and http://thegreenlever.blogspot.com/2011/11/few-guidelines-for-collecting-pallets.html


An Aid to Orchard management

We first came across the idea for an apple house in a garden centre in Holland it consisted of a piece of wood with the outline of an apple cut out of it. There was a wire to hold the fruit in place and a couple of strips on top to make a protective roof and give it the appearance of a house.

Apple picking with the Quality Control Inspectorate

Let them eat grapes. Omnivores also means fruitivores

We liked the idea for an apple house for our garden because we have a lot of apple trees and windfalls but the wild birds don't really get a look in with all the competition. I also think that wild birds feel more vulnerable eating on the ground, so the Apple House provides them with a safer and more natural position in which to enjoy the fruit.









Testing, testing, one, two three and four!








There is another more practical consideration for us as well and why this will be a much appreciated gift for anyone who has late apples, such as Jonagold. These fruit start to ripen  as the garden is beginning to prepare for Winter and the wild birds start to feel the urgency to store up some extra vitamins and minerals. So as Autumn begins to bite, so do they and finding the fruit not quite ripe, they move on, hopping and hoping for the next and the next apple to be ready.

Some thoughts about tools

The Apple House as designed for our video uses a minimum of simple hand tools and this bird feeder can with help and supervision easily be made part of a holiday project to get children interested in self-sufficiency and recycling.  Furthermore it can also be used as a way of introducing children to the practical use of hand tools, something which could be of immeasurable use in the not too distant future. As for financial concerns,  buying  power tools has never been cheaper, over the past couple of decades these latter have become a drug on the market and  you can pick up a handy and good quality cordless screwdriver, for example, for around 10 euros/dollars/pounds. Good hand tools however, are another story, 1930s novels are full of old men complaining about the quality of steel, they didn't know when they were well off.

You are often better buying old tools at a car boot or yard sale, they are usually of excellent quality and because of this can be sharpened and/or reset. Be aware of brand name old tools, over the past few years these have become collectors items and can now command very high prices. However, good tools are an investment and the more you become acquainted with them the more you will be competent to build up a fine collection.

                                                We are somewhere in the middle.

For the Apple House the tools you will need are as follows: a saw, tri-square, hammer and a tape measure.
 

You will also need the following materials and fixings, a pallet wood plank and block, some slats from a fruit crate, a few nails and tacks and some string. In addition you will need some interesting looking twigs and a pair of scissors or secateurs.

Handy hint for all projects - No tri-square? Use a CD box.

I get my fruit crates from my local organic shop, where we do our food shopping. They also give me the occasional pallet. In this way I know these crates come from organic growers and will not have contained potentially hazardous chemically treated fruit and veg.

The Apple House itself can be recycled in the Spring to become a nest box for a small bird, such as a wren, blue tit or robin. All it needs is the addition of a tacked on front and back made of fruit crate slats. Remove the twigs and in the Autumn transform it back to an Apple House.

With the addition of a piece of wood laid across the twigs the Apple House can be transformed into a table for small birds after the apples have all gone. Use string to attach rinds and nuts to the twigs for additional avian gourmet treats.

Now sit back, relax and watch Andy make the 'Apple House':

Hope you get to make one.

If you enjoyed this article, please feel free to share it, comment and/or ask questions.

Cheers, Andy

© Andy Colley 2014

RETURN TO GREEN LEVER CONTENTS PAGE FOR MORE ARTICLES